Devilbiss GPG Spray Gun (Gravity Feed)
Contents
Part No.: GPG-GPG1-14-C
GPG – Spray Gun Model
GP1 – Air Cap
13 – Nozzle Size (e.g. 13 = 1.3 mm)
Technical Specifications
Nozzle Size Range: 1.2-2.5 mm
Atomization Technique: conventional, High-Efficiency or HVLP
Pattern Size (max.): 330 mm [13.0 in]
Air consumption (max.): 270 lpm [71.3 gpm]
Nozzle/Needle Material: stainless steel
Fluid Flow (max.): 280 ml/min [0.074 gpm]
Gun Weight: 683 g [1.5 lbs]
Cup Capacity: 560 ml [18.9 oz.]
Air Supply Connection: Universal 1/4″ (fits 1/4″ BSP and 1/4″ NPS)
Air Cap Overview
| Air Cap | Part No. | Atomization | Air Consumption (lpm/cfm) |
Air Inlet Pressure recommended (bar/psi) |
Fan Pattern Size max. (mm/inch) |
|---|---|---|---|---|---|
| C30 | 905231 | conventional | 305/10.8 | 2.0/29 | 265/10.4 |
| C86 | 905235 | conventional | 300/10.6 | 2.0/29 | 290/11.4 |
| GPG2 | 905230 | HVLP | 450/15.9 | 1.8/26 | 310/12.2 |
| PR30 | 905210 | HVLP | 450/16.0 | 1.4/21 | 330/13.0 |
| 7E7 | 905226 | High Efficiency | 305/10.8 | 1.5/22 | 265/10.4 |
| GPG1 | 905229 | High Efficiency | 270/9.5 | 2.0/29 | 290/11.4 |
| PR10 | 905209 | High Efficiency | 340/12.0 | 2.0/29 | 305/12.0 |
Fluid Tip/Nozzle Overview
| Type | Nozzle Size | Nozzle Part No. |
| conventional | 1.4 mm | PROC-245-14 / 905223 |
| conventional | 1.6 mm | PROC-245-16 / 905224 |
| conventional | 1.8 mm | PROC-245-18 / 905225 |
| HVLP | 1.2 mm | PRO-205-12 / 905259 |
| HVLP | 1.3 mm | PRO-205-13 / 905260 |
| HVLP | 1.4 mm | PRO-205-14 / 905261 |
| HVLP | 1.5 mm | PRO-205-15 / 905262 |
| HVLP | 1.6 mm | PRO-205-16 / 905263 |
| HVLP | 1.8 mm | PRO-205-18 / 905264 |
| HVLP | 2.0 mm | PRO-205-20 / 905265 |
| HVLP | 2.2 mm | PRO-205-22 / 905331 |
| Primer | 1.4 mm | PRIPRO-220-14 / 905213 |
| Primer | 1.6 mm | PRIPRO-220-16 / 905214 |
| Primer | 1.8 mm | PRIPRO-220-18 / 905215 |
| Primer | 2.0 mm | PRIPRO-220-20 / 905216 |
| Primer | 2.5 mm | PRIPRO-220-25 / 905217 |
Features
The Devilbiss GPG spray gun is a general purpose spray gun and the successor to the Devilbiss GPI primer spray gun. The Devilbiss GPI spray gun was introduced as a typical primer spray gun, available only in 1.6mm and 1.8mm nozzle sizes. Due to its good performance, Devilbiss later launched the Devilbiss GPG spray gun, basically on top of it. But this time as a ‘full-fledged’ spray gun, i.e. nozzle sizes from 1.2 mm to 2.5 mm and seven (7) different air caps to cover conventional, high efficiency and HVLP atomization.
Applications
General purpose applications around the bodyshop, incl. enamels, synthetics, primers and 2 pack commercial paints.
Options
Special primer nozzles UV1 (PRIPRO-219-UV1/905211) and UV2 (PRIPRO-219-UV2/905212) are available specially for UV materials.
Service Manual
Devilbiss GPG Instructions Manual (*.pdf, 1.9 MB)