Devilbiss GTi Pro Lite Spray Gun (gravity feed)

Home » Products » Spray Guns » Manual Spray Guns » Devilbiss GTi Pro Lite Spray Gun (gravity feed)
Devilbiss GTi Pro Lite spray gun, gravity feed

Devilbiss GTi Pro Lite spray gun, gravity feed

Item No.: PROL-HV30-12

PROL – Pro Lite (Gravity) 
– air cap (e.g. TE20, TE30, etc..)
12 – nozzle size (e.g. 12=1.2mm)

Fluid Nozzle/Needle

Range: 1.2-1.4 mm
1.2 mm (PRO-200-12-K / PRO-301-K)
1.3 mm (PRO-200-13-K / PRO-301-K)
1.4 mm (PRO-200-14-K / PRO-301-K)

Air Cap

Atomization Technique: HVLP, High Efficiency EPA compliant
Air consumption: see chart
Air Cap Selection Guide:
see chart

Air Cap No. Order No. Technology Air Flow (l/min)
 HV30  PRO-102-HV30-K  HVLP  465
 TE10  PRO-102-TE10-K  High Efficiency  275
 TE20  PRO-102-TE20-K  High Efficiency  350


Weight: 500g (gun only)
Air Supply Connection: Universal 1/4″ (fits 1/4″ BSP and 1/4″ NPS)


The GTi Pro Lite (gravity feed) is a lightweight spray gun for automotive refinishing with both high volume, low pressure (HVLP) technology or High Efficiency EPA compliant technology. The gun utilizes a range of new air caps and fluid nozzles to provide very good atomisation for most types of solvent-based and water-based coatings. The gun also features a coaxial trigger air valve design for lighter trigger pull and improved air flow.

Note! A very useful little feature are the “Universal” threads for air, i.e. the thread are suitable for both BSP and NPS connectors.


automotive refinishing

Service Manual

GTi Pro Lite Operation Manual (*.pdf, source: Carlisle Fluid Technologies)

Video – Devilbiss GTi Pro Lite

[email protected]