Automatic Spray Gun Devilbiss AGGS-522 (HVLP)

Published by merscher on

Devilbiss AGGS-522 is discontinued

The Devilbiss AGGS-522 was one of the first Devilbiss’ automatic spray guns with HVLP atomization which was (and still is) widely used in harsh working environments, including ceramic glazing and leather coating. The spray gun is suitable for use with automatic and semi-automatic machines. The design utilizes high volume low pressure atomisation air (HVLP) to reduce overspray.

To handle a wide range of coating materials the material passages, fluid nozzle/needle are manufactured from high grade stainless steel. Pressure feed material supply can be re-circulating or direct.

A removable spray head simplifies maintenance and cleaning of material wetted components. The gun is triggered by compressed air to a single acting cylinder by a remotely positioned 3 way valve.

Technical Details AGGS-522

Atomization: HVLP

Nozzle Sizes: 0.85, 1.0, 1.4, 2.0 mm

Nozzle / Needle Materials: stainless

Air Caps (Max. Pattern): 
JGHV-16-13 (305 mm)
JGHV-16-18 (495mm)
JGHV-16-162 (365mm)

Air Inlet Size: 1/4″ BSP
Fluid Inlet Size: 3/8″ BSP

Air Pressure (max.): 9 bar
Fluid Pressure (max.): 14 bar

Weight: 950 g

Paint Circulation: yes

Application: General purpose solvent based and waterborne coating materials, food and pharmaceutical processes. ceramic glazing and leather coating

FAQ: What is the difference between AGGS-522, AGG-510 and GTI-A?

All three spray guns have the same basic design, but different nozzles/needles and air cap. The AGGS-522 is HVLP, AGG-510 is conventional and GTI-A is compliant type of automatic spray gun.

Do you want to replace AGGS-522?